120 spindles Yarn Winding Machine,
0.06KW Yarn Winding Machine,
600m/min cotton ball winding machine
Hard Winding Machine
17. Output calculation: Example 32S yarn = 54000m/kg, normal speed 800m/min. According to 22 hours of working hours, each spindle is about 19.5kg/ spindle.
It has the advantages of short body and high speed. The small pulley of the motor drives the large pulley of the corresponding proportion of the grooved drum, which reduces the actual power consumption. When the inverter outputs 37HZ, the grooved drum winding linear speed is 700m/min (the conventional model is at 49HZ The time-line speed is 700m/min), the length can be directly displayed on the display, and the length of the oblique tube is controlled at plus or minus 3%.
18. Winding stroke and adapting bobbin; stroke 148mm. The bobbin is determined by the customer.
19. Winding speed: 300m-1000m/min. The adjustment speed can be set on the touch screen, and the speed adjustment function is realized by the Japanese Panasonic inverter. Frequency conversion speed regulation has power saving and stable speed.
20. Forming size; can meet the requirements of tube ￠165mm-￠180mm, weight 1kg-1.2kg
21. Tension device:equipped with a set of fine-tuning passive tensioner, according to the yarn density, adjust the precise weight of the colorful tension film, the negative film is made of stainless steel, so that the suitable density requirement is more accurate.
|￠95mm grooved drum applicable for winding a variety of yarn||Empty bobbin recycling conveyor belt|
|Electric yarn cleaner||Conveyor line for drums loaded with yarn|
22. Anti-overlapping device; this machine adopts two sets of measures to implement anti-overlapping function; 1, swing frequency function; set the amplitude of swing frequency 0-18% and the interval time of swing frequency 0-1000ms on the touch screen. A single-chip module is programmed to perform actions. Makes the package effectively avoid the overlap phenomenon in operation.
23. Single-spindle yarn break auto-stop device; this machine adopts photoelectric probe to control yarn break auto-stop.
24. The advanced package pressure compensation device, by adjusting the length of the back pressure spring, realizes the compensation of the pressure change caused by the difference of the package size caused by the difference in the pressure between the package and the grooved package during the winding process. Increase the pressure during the initial winding of the cheese, and overcome the increase in the weight of the cheese during the end of the winding, so as to achieve a uniform density of the inner and outer layers of the cheese.
25. Power; single spindle 0.06kw. Energy-saving grooved drum motor
26. Yarn supply form:both parallel and tapered
27. Clean blower:Included
28. Yarn conveyor belt:Included