|Control System:||Full Auto||Warranty:||We Will Provide You 01 (one)-year Warranty.|
|Installation And Debugging:||One Engineer Will Be Sent For Instructing Installation, Under The Condition Of Pipework&work Stuff Ready, Need 7-10 Working Days.||Power:||85/170KW|
Polyester Acrylic Yarn Dryer Machine,
CE Yarn Dryer Machine,
250kg/h cotton drying machine
Machine Equipment Factory For Polyester / Acrylic / Cotton
Technical Specification and standards
|Electrical supply voltage||380V±5%|
|Electrical supply Frequency||50HZ|
|Conveyor belt operating speed||2.5M/H-107M/H|
|Cooling system||Water cooling;air cooling|
|Steam Consumption||20-25kg/h Pressure≥0.4Mpa|
|Max product height||260mm|
|Max loading width||1650mm|
QR01-85kw is suitable for the drying of yarn packages after dyeing and hydro extraction. The technical standard and the quality guarantee terms are specified as follows:
I. Technical standard:
1. Inlet and outlet heads
Including supporting frame, rectangular-section tubular frame with painted lateral protection steel plates. Equipped with:
Length: front machine frame: 2.75m, rear machine frame: 2.25m
Connected by hard “JMX” module, width: 1.74m
The speed reducer driven by chain wheel brings along the conveyor belt to move in straight line. The speed is controlled by inverter. A high speed device is equipped for quick output of the products from the drying cabinet.
3. Drying cabinet
Including main machine frame, rectangular-section frame, both laterals are covered by aluminium plates, with stainless steel plates on top and bottom side. Equipped with:
Aluminium-magnesium alloy made capacitive electrode sQRtem consists of parallel round tubes protected with polypropylene insulation materials. Equipped with silver plated copper tuner and voltage balancing inductance.
4. High frequency generator
QR01-85KW Radio frequency dryer which is independently designed and manufactured is suitable for industrial production. It has high reliability and high efficiency(up to 70%). The components can be easily removed and installed through check window. Equipped with:
5. Electric working board & controller
Electric working board consists of the control of electric & electronic components for control, instruction and protection. The instruction & testing board is installed on one side of the machine.
With main functions of:
6. Safety guarantee & international standard for components
All the components are made by the best manufacturers from home & abroad and are sufficiently oversized for high reliability.
With all the safety protection measures, such as the check window locked by safety handle, copper beryllium alloy sealing strip, high voltage circuit micro break switch, special structure to prevent electromagnetic leakage in the inlet & outlet heads.
All the electrical & electronic devices comply with CEI-IEC standard, the high & low voltage circuits are completely separated, all the electromechanical devices are installed on the board indicated with number nameplates, all the ends of leads are numbered.
To comply with the special regulations in different countries, the dryer is equipped with electromagnetic disturbing restrain sQRtem.
7. Paint & colour
The dryer is painted with 2 layers: priming paint & orange shaped paint(excluding the stainless steel part)
Standard colour combination: ocean grey
8. Dimension & weight
8946mm×3026mm(max.)×3390mm, about 4.5T
9. Working requirements
Power supply: 3 phases 380V±5%, 50Hz±2%
Cooling water inlet pressure: 1 kgf/cm2, flow rate: 4m3/h
Steam pressure: 5 kgf/cm2
10. Documents attached
Operation manual, quality certificate, packing list, operation manual of inverter, operation manual of plate heat exchanger
If the buyer need, the seller can be responsible for machine commissioning. The buyer shall pay for the commissioning engineer’s round trip air ticket cost, local board, lodging, transportation cost and the allowance of USD 70/person/day.
Quality guarantee terms
Quality guarantee period
12 months after delivery regarding all the machine problems except for the triode.
The quality guarantee period is 12 months after machine start-up.
The quality guarantee of triode is mainly to replace new triode with the old one with discounted price within the conventional 12 months guarantee period. The discounted price = triode price – triode price × remaining months/12.
General conditions of the validity
The operation manual must be read carefully before operating the dryer.
The valid quality guarantee excluding the faults due to improper use, negligence, malfunction or noncompliance with the instructions in the operation manual. The quality guarantee excluding: natural disaster, fire accident and other damages unavoidable under normal operation of the machine. No Claims put forward due to insufficient production capacity will be supported.
Goods supply range
Our equipment supply does not include the facilities for factory building, power feeding and steam pipe & air outlet pipe.
We will provide you with professional services regarding special maintenance & repair of the machine. You must contact our sales dept. for any machine problem within or out of the quality guarantee terms.
If the machine to be repaired is out of the quality guarantee period, the customer shall bear the business travel and board & lodging costs of our technician, including the cost of the parts to be replaced, freight and the corresponding labor cost.