500m/min electric yarn winder machine,
60W electric yarn winder machine,
Double Spindles Hard Winding Machine
High Quality Double Spindles Automatic Spandex Winder Yarn Hard Winding Machine
|￠95mm grooved drum applicable for winding a variety of yarn||Empty bobbin recycling conveyor belt|
|Electric yarn cleaner||Conveyor line for drums loaded with yarn|
8. Yarn weight balancing unit:Spring balances and adjusts winding pressure
9.Y arn breakage control:Electric yarn breakage auto-stop
10. Supply voltage:Three phase 400V±10% 50/60HZ
11. Length measurement method:Theoretical length or length measured by hall sensor
12. Applicable raw materials; using 32S as the calculation equivalent, the working speed of cotton, polyester-cotton, and blended spinning is 800m/min. Hemp, polyester and viscose blended spinning and other working conditions speed is 600m/min
13. 72 spindles/set, double-sided machine. Double touch screen control (11.2m×1.05m×2.25m. Including the height of the blower). (12 spindles, a basic unit of 1.81 meters), according to the production site can choose 72 spindles/set 84 spindles 96 spindles, 108, 120, 132 spindles) Save space, save the working distance of workers during roving operations, and improve efficiency
14. Type; double-sided grooved drum type
15. Transmission mode: single spindle motor drive (60w/spindle). Start at 0 speed, which is conducive to constant yarn tension
16. Number of spindles per set: 108 spindles/set, single spindle round belt transmission. Single spindle counts the length.
17. Output calculation: Example 32S yarn = 54000m/kg, normal speed 800m/min. According to 22 hours of working hours, each spindle is about 19.5kg/ spindle.
It has the advantages of short body and high speed. The small pulley of the motor drives the large pulley of the corresponding proportion of the grooved drum, which reduces the actual power consumption. When the inverter outputs 37HZ, the grooved drum winding linear speed is 700m/min (the conventional model is at 49HZ The time-line speed is 700m/min), the length can be directly displayed on the display, and the length of the oblique tube is controlled at plus or minus 3%.
18. Winding stroke and adapting bobbin; stroke 148mm. The bobbin is determined by the customer.